Skip to main content

Dalatec Corporation

Dalatec Company news and new product offerings.

United States Pharmacopeia (USP) 797

morter

Dalatec has seen many new requirements from hospitals and pharmacies that need cleanroom consumables, wipers, swabs, mops and disinfectants for their required sterile environments. The United States  Pharmaccpeida (USP) has developed standards for compounding in sterile environments. These standards help compounding practitioners adhere to widely acknowledged, scientifically sound procedures and practices, and facilitate the delivery of consistent and good-quality prepared medicines to patients. State Boards of Pharmacy may adopt these USP standards into their regulations. The objective of USP <797> is to describe conditions and practices to prevent harm, including death, to patients that could result from: Microbial contamination,Excessive bacterial endotoxins,Variability in the intended strength of ingredients,Chemical and physical contaminants,Incorrect type or quality of ingredients in Compounded Sterile Preparations (CSPs). USP <797> provides practice and quality standards for all persons who prepare CSP drugs and nutrients and all places they are prepared. They require that the preparation of CSPs occur in...

Continue reading

Solutions for Disinfecting

TX3270

 ITW Texwipe is a manufacturer of cleanroom consumable products, which are used in the environment which one addresses the levels of potential contamination's and respective contaminants when working in bio medical, pharmaceutical or microelectronics. (please see attached Texwipe Solutions Brochure) Since there has been much recent news about viruses and bacteria contamination, especially Ebola,  we thought it would be timely and of interest to relate the types of cleanroom products and how they address "disinfecting".  Disinfection reduces the number of viable microorganisms.  When instruments are used inside the body, the disinfectant is not enough, the instruments should be sterilized.  Sterilization kills viable microorganisms. For the sterilization of the instruments (like surgical instruments) sterilants are used.   The sterilants are the high concentration of Hydrogen peroxide solutions (35%) and Aldehides (like formaldehyde).  These solutions are not used for the surface disinfection because they are very corrosive and toxic for people.  The instruments are...

Continue reading

Introducing Liquid Silicone Rubber (LSR) from Trelleborg

trelleborg-medical-devices

Two years ago, Trelleborg Sealing Solutions purchased a liquid silicone company headquartered in Switzerland, which provided silicone extrusion and silicone molding, all in a clean room facility. The facility in Stein am Rhein, Switzerland and another in Northborough, Mass., allows the company to manufacture and design two-part Liquid Silicone Rubber (LSR) devices and components for the medical, biotech, pharmaceutical, and food and beverage industries. Liquid silicone rubber is best suited to life science applications because it features matchless inertness and bio compatibility, which should be considered when factoring in potential bacteria growth and alleviating contamination. Silicone rubber is compatible with human beings and its mechanical properties are highly suitable for dynamic applications where accuracy, consistency and longevity are required. Features and benefits: Facilities: LSR Center of Excellence in SwitzerlandGlobal LSR manufacturing footprint in Europe, North America and ChinaISO 13485, ISO9001 and ISO 14001 certifiedProduct design centers globallyState-of-the-art cleanroomsIS 8 (Class 100,000)...

Copyright: © 2014

Continue reading

Introducing Texwipe Sterile Swabs

itw-texwipe-swabs

Texwipe now offers sterile swabs which are Gamma Irradiated to a Sterility Assurance Level of10¯⁶ in accordance with ANSI/AAMI/ISO 11137. The swabs come in: CottonFoamPolyester Each swab is individually wrapped through clear packaging and has a lot code and expiration date.Industries:PharmaceuticalBiologicsMedical DevicesMicrbiological LaboratoriesDiagnostic Testing LaboratoriesApplications:Diagnostic SamplingEnvironmental MonitoringPicking up fine powders (Foam wipe)Cleaning with solvents such as IPA (Cotton or Polyester Series)

Springtime with Dalatec

Page1

Dalatec is a value added reseller of Associated Spring Raymond (ASR). Here is an overview of Associated Spring Raymond  Engineered Solution Provider Engineering Design Services to Solve ProblemsPrototype to Customer Specifications for ValidationProduction manufacturing in Appropriate Environment (ISO, TS,AS, etc....)Stocking & Distribution on a Global Basis Values Exceed Customer ExpectationsSupply Innovative Engineered Products GloballyMaximize Quality, Delivery & Customer Service History Over 150 Years of HistoryOriginal Trademark Die Springs ColorsPart of Barnes Group, Inc. (NYSE: B)   ASR Custom engineered Solutions Dalatec Corporation has a Global Footprint   Americas   Europe    Asia   ASR Core Technologies Include: Services and Industries Engineering DesignApplication EngineeringProtype ValidationManufacture to PrintStocking/JITD Support Solutions Provider Delivered on time. Not just parts! Quality is First  Machining and Spindle Applications Motor and Gearbox Applications Single Source Multi-wave SpringsFinger Spring WashersDisc SpringsWave SpringsDINCloverBelleville Valves

Flexaust Industrial Hoses

Green Hose

       Industrial Hoses: Dalatec is a master global distributor for Flexaust. Flexaust is a major manufacturer of durable, long lasting, flexible hose and ducting solutions for industrial and commercial applications. Most of our customers in this product have been in digital printing to semiconductor manufacturers. Please checkout the links below for the Flexaust catalog and material resistance guide Flexaust online catalogChemical resistance guide Flexaust has developed hoses which work under certain conditions or certains applications Examples:Applications requiring condutive, resistive, dissipative or grounding capability:FDA ApprovalUL94VUV ProtectedCrush Proof How many of you count yourselves “totally confused” when it comes to explaining any of the following: Static ConductiveStatic DissipativeStatic GroundedLevels of Static Electricity “Resistivity”Ohms/Square Surface ResistivityWell, if you said yes to any or all of the above, count yourself in the majority of the people in our industry. What we are going to attempt to do with this paper is to filter this “confusion” down to a level of...

Copyright: © Dalatec Corporation

Continue reading

Our Mission

elecmech

Dalatec's mission is to be a successful supplier/integrator. The core to reach our goals is based on having the following attributes: KNOWLEDGEFACTORY SUPPORT (COMPETITIVE PRICING + GREAT SERVICE)THE HUMAN ELEMENT DALATEC has expanded and developed a great affinity with companies that need mechanical engineering support with: ELASTOMERSPNEUMATICSHYDRAULICSOPTICSMOTION CONTROLTHERMOPLASTICSTHERMODYNAMICS In addition DALATEC developed a department dedicated to supplying cleanroom products. It seems like it has been a while since making “cold calls” was the main method to reach out to get new customers. After evolving for over 25 years in the business, we realize the importance of utilizing SEO, internet advertising and social media to reach out to potential clients. HAVING THE RESOURCES TO GET YOUR NAME OUT THERE ON THE INTERNET DOES NOT NECESSARILY MAKE YOUR COMPANY GREAT!!! YOU MUST HAVE THE GOODS:KNOWLEDGE AND PRODUCT SUPPORT! DALATEC PERPTETUATES THESE POSITIVE ATTRIBUTESAnd of course there is the human element..HERE IS A LIST...

Continue reading